Manual mastering with headroom and kick ducking
Mastering Lab lets you start from neutral, a preset or suggested auto settings. Use the listening comparison to decide which changes help your mix.
Example 1 – Raising a quiet mix
Your preview reads −15.5 LUFS and around −3 dBTP. With a −14 LUFS target and a −1 dBTP ceiling, the gap is 1.5 LU and estimated headroom is roughly 2 dB. Try a small increase in input gain and check again. If an active dynamics stage responds, the loudness change can be smaller than the gain change.
Example 2 – Kick and bass in an EDM loop
Loop a passage with kick and bass and start with 1–2 dB of ducking. Watch the hit markers and shorten recovery if the bass stays down too long. Compare the original and processed versions at matched loudness. A stereo mix includes the kick in its low band. Separate kick and bass stems allow more targeted sidechaining in the mix.
Compare snapshots and export
Save a subtle and a stronger setting in A and B. Switch between them in the same loop and match loudness. Load the preferred version before export. Both tools use the same account activation for downloads. Use the measurements of the encoded file for delivery.
Open Mastering Lab →Try Kick & Bass →
What does your track need?
Check the tonal balance and listen to a section with vocals and cymbals. Then audition a small high-end adjustment in the Lab.