Features

Studio-Grade Mastering. Zero Manual Work.

A 12-stage DSP chain paired with adaptive parameter selection delivers reproducible, measurable results in seconds.

12 Processing Stages
7 Export Formats
11 Platform Presets
Adaptive Engine
The Process

Your Master in Three Steps

1
WAV · MP3 · FLAC · AIFF
Drop It In
WAV, MP3, FLAC or AIFF — up to 200 MB; duration depends on sample rate and memory budget
→
2
LUFS · BPM · Key · DR
Engine Analyzes
Spectrum, loudness and dynamics get fully scanned
→
3
WAV 24
FLAC
MP3 320
AAC
Grab Your Master
WAV, FLAC, MP3 and AAC ready right away

Listening and adjusting in the studio

Try Studio Mode →

Try the demo without signing in and switch between the waveform and the live spectrum. For your own track, sign in and use the upload area at the top of the console. After analysis, choose your settings and export format. Select “Master track” to follow the processing stages in a pop-up.

Fine-tune directly in Studio Mode

After mastering, compare Original and Master in the monitor. Open Fine-tuning to adjust EQ, dynamics, stereo and saturation directly in the console. Audition a loop, create a new master to apply your changes to the entire track, then open Downloads. The up arrow returns you to the top.

After mastering

Switch between Original and Mastered in the monitoring section. The True Peak displays describe the exported files. Turn on loudness matching to compare tone at a similar level. The sound fingerprint shows measured frequency bands, and timeline markers jump to distinct local level changes.

Manual fine-tuning →

Choose a loop, adjust the EQ dials and use the stereo vectorscope or bus reduction meter. A/B switches between base settings and your edits. Render the section on the server for a second check, then create a new master once you are happy.

Vocal Chain →

Switch between original and processed vocals while listening. The mix dial blends both signals. The separate meters show how hard the de-esser and compressor are working. Render a WAV with the selected blend.

Album monitoring →

Measure two to eight songs, solo them one by one, and use the big dial to set a comparison target. Match preview adjusts playback gain within the measured true-peak headroom. Keep your files and use the suggestions for your next mix or master.

Try the stem mixers

Try the public four-stem demo or Vocal Remover demo with faders, mute and solo. Full WAV downloads for your own tracks require enabled access.

Cutting and checking low end

The Audio Cutter magnifies the waveform at each cut and marks the fades. In the Kick/Bass check, select a frequency range to inspect the overlap.

Choose a color theme in the navigation. The studio controls follow it, and you can save your choice in your dashboard. If something goes wrong, select “Report a problem” at the bottom left to prepare an email draft.

Manual mastering in four steps

  1. 1. Pick a starting point. Open a track and choose a preset, or have platform, genre and intensity suggest editable settings after sign-in.
  2. 2. Make small changes. Use knobs or faders, check which modules are active and compare the original, two saved snapshots, or the chain with one module bypassed.
  3. 3. Read headroom and loudness. If the preview needs 1 dB to reach target and has 1.5 dB of estimated headroom, audition a small input gain increase and measure again.
  4. 4. Export and verify. Choose from seven formats once your account is enabled. The output card reports measured loudness and true peak of the encoded file.

Open Mastering Lab →Try Kick & Bass Sidechain →Read the FAQ →Headroom and ducking examples →

From comparison to release

  1. Release Check for Finished Masters →

    Measure loudness and true peak of the finished WAV, MP3 or AAC and inspect its codec, sample rate and channels.

  2. Online Mastering Blind Test →

    Compare two masters in sync at matched loudness with their identities hidden.

  3. Online DJ & Loop Editor →

    Build loops by BPM and bars, audition the seam and export a WAV loop or extended DJ edit.

  4. Audio Visualizer for Shorts and Reels →

    Make a 9:16 music video with cover art, a waveform and an optional original-to-master switch.

  5. Kick & bass with stems →

    Let the kick trigger bass-only ducking. Audition locally and download the processed bass after activation.

Read five practical examples →

Signal Chain

The 12 Stages Behind Your Master

Every stage is tuned for professional mastering, from the initial DC offset fix to the final LUFS normalization.

01
DC Remove
→
02
Gain Staging
→
03
Correction EQ
→
04
De-Esser
→
05
Multiband Comp
→
06
↔
M/S Processing
↓
07
Saturation
→
08
Final EQ
→
09
Bus Comp
→
10
True Peak Lim
→
11
Dithering
→
12
Codec Verify
Input
EQ
Dynamics
Stereo
Saturation
Limiting
Output
Feature Set

Everything Beatzucker Packs In

Adaptive params ✓

Adaptive Parameter Selection

Spectrum, dynamics and stereo measurements reproducibly adapt EQ, compression and width to the selected preset and target platform.

AdaptiveMesswertbasiertPlattform-optimiertKostenlos
EQ
→
COMP
→
M/S
→
LIM

A 12-Step Processing Chain

DC removal, correction EQ, de-essing, multiband compression, M/S processing, saturation, bus compression, true peak limiting and noise-shaped dithering — the full pro workflow runs in seconds.

EQMultibandM/SLimiting
0%65% Balanced100%

Intensity Control

One slider decides how hard the chain works: 0% stays close to the original, 100% pushes it to the max. Every DSP parameter scales along with it, without pumping or clipping.

0–100%TransparentMaximum
−14LUFS
−14LUFS
−9LUFS

Per-Platform Loudness

Pick your target: Spotify (−14 LUFS), Apple Music (−16 LUFS), YouTube (−14 LUFS), club (−9 LUFS), or set a custom value. True peak ceiling stays at −1 dBTP across the board.

SpotifyApple MusicYouTubeClub
A
B

Built-In A/B Player

Switch between the original (A) and the master (B) with a click, seamlessly and without interruption, while a live visualization tracks the music in sync.

EchtzeitSync-VisualizerLive

Manual Mastering with Live Preview

After the automatic master, fine-tune EQ, multiband compression, stereo width, saturation, bus compression. A movable audio loop and instant A/B comparison make changes audible in near real time before the full DSP chain renders a new master.

Live PreviewEQMultibandA/B
−14.0
LUFS
11
DR
128
BPM

Deep Track Analysis

From LUFS and true peak through dynamic range and crest factor to BPM, key, spectral centroid, stereo width, mono compatibility and per-band frequency energy — every metric at a glance.

LUFSDRBPMKey
REF
→ adaptive →
OUT

Reference Matching

Up to three weighted references guide a shared tonal target. Influence, bass, brightness and smoothing are independent; loudness stays separate.

Adaptive MatchingReferenceSpectralKostenlos

Spectrogram Waterfall

An animated waterfall display shows the frequency spectrum shifting over time in real time, from sub bass all the way up to the air frequencies.

EchtzeitFrequenzZeit
LUFS: −14.0
Peak: −1.0 dBTP
DR: 11

Before/After Report

A detailed original-vs-master comparison shows LUFS values, adaptive parameters, dynamic range and every setting used — all right in your browser.

Pre/PostLUFSParameter
WAVFLACMP3AAC

Your Choice of Export Format

Choose WAV 32-bit float, WAV 24/16-bit, FLAC 24-bit, MP3 or AAC for delivery. A compact MP3 preview is also created when the encoder is available.

WAVFLACMP3AAC

Mobile-First

The interface adapts to any screen, whether you're working from a laptop, tablet or phone.

ResponsiveMobileTablet
MMaster
⎵Play
A/BA/B

Keyboard Shortcuts

Move faster: M starts mastering, space plays or pauses, A and B jump between original and master.

MSpaceA/B
TrackingCookiesAnalytics
✓ EU-Server · DSGVO · Privacy by Design

Privacy by Design

No tracking, no ad cookies, no analytics. Your audio files don't stick around on the server, and even fonts are served locally so no external request ever leaks your IP.

No TrackingKeine Werbe-CookiesDSGVO-konformEU-Server
Streaming Targets

Tuned to Hit Every Platform

Platform sets the loudness target. Peak and dynamics protection may require a quieter result.

PlattformLoudness TargetTrue Peak
Spotify
−14 LUFS−1 dBTP
Apple Music
−16 LUFS−1 dBTP
YouTube
−14 LUFS−1 dBTP
Tidal
−14 LUFS−1 dBTP
Amazon Music
−14 LUFS−2 dBTP
Deezer
−15 LUFS−1 dBTP
TikTok
−13 LUFS−1 dBTP
SoundCloud
−8 LUFS−1 dBTP
Club / DJ
−9 LUFS−1 dBTP
Broadcast/TV
−23 LUFS−1 dBTP
Custom
ManuellManuell
Export

One Pass, Every File Format

Choose the delivery format; an MP3 preview is also created when available.

✓WAV 32-bit Float✓WAV 24-bit✓WAV 16-bit✓FLAC 24-bit✓MP3 320 kbps✓MP3 128 kbps✓AAC 256 kbps

Ready to run your first automatic master?

Analyze your track, choose settings and compare the finished master.

Get Started →

Report a problem

Tell us what went wrong. You can review and send the report in your email app.

The page path and app version are added to the draft. Leave out passwords or private access links.

Email address info@re-beatz.com